Cleanfit Blue Monster® 70885 Non-Toxic Thread Seal Tape, 1429 in L x 1/2 in W, 0.0035 in THK, PTFE

Cleanfit Blue Monster® 70885

  • Manufacturers: The Mill-Rose Company
  • Brand Name: Cleanfit Blue Monster®
  • PV Part No: MSTT1001429
  • MPN: 70885
  • Min. Order Qty: 1
  • Qty. Interval: 1
  • Availability: loading

Blue Monster PTFE thread seal tape is a thicker, denser, general-purpose thread seal tape that comes in a monstrous 1429 in roll. That's 5 times more tape than conventional rolls of low density thin tapes. Fewer wraps are necessary to affect a leak proof seal and it applies easily. No waste and no re-taping make sealing joints a breeze. Now available in a smaller roll, Mini-Monster PTFE thread sealant tape. Blue Monster thread sealing tape is manufactured from PTFE resin, a polymer consisting of recurring tetrafluoroethylene monomers whose formula is (CF2-CF2)n. It is inert and compatible with a very wide range of materials. Use Blue Monster on threads made from galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, polypropylene, PVC, CPVC, ABS, fiberglass and more.

Thread Seal Tape, Non-Toxic, 1429 in Length, 1/2 in Width, 0.0035 in Thickness, PTFE Material Type, Blue, -400 to 500 deg F Maximum Operating Temperature

Color      :      Blue
Length      :      1429 in
Material Type      :      PTFE
Maximum Operating Temperature      :      -400 to 500 deg F
Thickness      :      0.0035 in
Type      :      Non-Toxic
Width      :      1/2 in
  • Compatible with a broad range of gases and liquids
  • Compatible with a broad range of piping materials will not harden or crack on the joints
  • Effective across a broad range of temperatures and pressures
  • Acts as a thread lubricant and anti-seize
  • Prevents electrolytic corrosion of threads
  • No curing time
  • Unlimited shelf life
  • Non-flammable
  • 99.6% PTFE <0.4 percent composition
  • >100% elongation
  • 15 N/sq-mm tensile strength
  • Pressure rating Mill-Rose blue monster thread sealing tape has been used to seal fittings carrying water and oil at pressures up to 10000 psi or 69000 kPa
  • -450 to 500 deg F PTFE is completely stable up to 500 deg F
  • Decomposition is slow up to 750 deg F
  • Although decomposition will occur on contact with naked flames
  • Pressure ratings are relative to the quality and torque of the fittings and the amount of tape used
  • pdfCatalog
  • pdfSpecification Sheet
  • linkVideo Link