Zoeller® 53-0001 Mighty-Mate M53 Automatic Effluent/Dewatering Submersible Pump, 43 gpm Flow Rate, 1-1/2 in Outlet, 1 ph, 3/10 hp, Cast Iron

Zoeller® 53-0001

  • Manufacturers: Zoeller Company
  • Brand Name: Zoeller®
  • PV Part No: 022953001
  • MPN: 53-0001
  • UPC: 053514023607
  • Min. Order Qty: 1
  • Qty. Interval: 1
  • Availability: loading

The Mighty-Mate series of submersible pumps is designed for use in residential or light commercial dewatering applications and can be used to transfer groundwater or effluent. Cast iron models include a epoxy powder coated finish to prevent corrosion and are designed to provide great heat dissipation from the motor, ensuring a long service life. As with every Zoeller® pump, each one is 100% pressure-tested, submerged and run to ensure quality and reliability for years of trouble-free performance. This attention to detail is an inherent feature of every pump in this series, making it one of the most reliable in the industry.

Zoeller® Effluent/Dewatering Submersible Pump, Automatic, Series: Mighty-Mate M53, 43 gpm, 1-1/2 in Outlet, 19-1/4 ft Maximum Head, 3/10 hp, 115 VAC, 9.7 A, 60 Hz Frequency, 1 ph ph, 1550 rpm Motor, 3-Wire Cord, Non-Clogging Vortex Impeller, 130 deg F, Sleeve Bearing, Cast Iron, 10.0625 in H x 10.06 in W Dimensions

Amperage Rating      :      9.7 A
Bearing Type      :      Sleeve
Cord Type      :      3-Wire
Dimensions      :      10.0625 in H x 10.06 in W
Flow Rate      :      43 gpm
Frequency Rating      :      60 Hz
Horsepower      :      3/10 hp
Impeller Type      :      Non-Clogging Vortex
Material      :      Cast Iron
Maximum Head      :      19-1/4 ft
Motor Speed      :      1550 rpm
Outlet Size      :      1-1/2 in
Phase      :      1 ph
Series      :      Mighty-Mate M53
Temperature Rating      :      130 deg F
Type      :      Automatic
Voltage Rating      :      115 VAC
  • Corrosion-resistant, powder coated epoxy finish
  • No sheet metal parts to rust or corrode
  • Stainless steel screws, switch arm, guard and handle
  • No screens to clog, watertight, neoprene square ring between motor and pump housing
  • Solid, buoyant, polypropylene float, oil filled, hermetically sealed, automatic reset thermal overload protected motor
  • Upper and lower sleeve bearings running in bath of oil, Entire unit pressure-tested after assembly, carbon and ceramic shaft seal
  • Watertight and dust tight, permanently oiled bearings
  • Cast iron switch case, motor and pump housing, engineered thermoplastic base, glass filled, plastic impeller with metal insert
  • Entire unit pressure-tested after assembly
  • Class B insulation, 7-1/4 in/3 in auto On/Off points
  • 1/2 in spherical solid handling, 9 ft cord, oil filled cooling
  • Cast iron cap, motor and pump housing, base, carbon and ceramic mechanical seals, engineered plastic impeller, stainless steel hardware, neoprene gasket
  • AISI 1215 cold roll steel motor shaft
  • Single phase, shaded pole, 3 wire cord and plug
  • 1-1/2 in NPT discharge
  • pdfCatalog https://www.pipevalves.com//ASSETS/DOCUMENTS/ITEMS/EN/https://assets.unilogcorp.com/2/ITEM/DOC/Zoeller_53_0001_Catalog.pdf
  • pdfInstruction/Installation Manual https://www.pipevalves.com//ASSETS/DOCUMENTS/ITEMS/EN/https://assets.unilogcorp.com/2/ITEM/DOC/Zoeller_53_0001_Manual.pdf
  • pdfSpecification Sheet https://www.pipevalves.com//ASSETS/DOCUMENTS/ITEMS/EN/https://assets.unilogcorp.com/2/ITEM/DOC/Zoeller_Company_530001_Specification_Sheet.pdf